Product ID:B&B CONTACT E
MSDS Date:04/09/1987
FSC:6850
NIIN:01-248-9829
MSDS Number: BGRHY

Emergency Phone: 305-888-5247

Info Phone: 305-888-5247

Cage: 21361

Telephone: 305-888-5247

Cage: 21361

DISTILLATES (PETROLEUM) HYDROTREATED LIGHT

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

RUBBER (PARTICULATE) SUCH AS B.F.GOODRICH HYCAR 1422. THIS

Fraction By Weight: 10-15%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:MAY CAUSE EYES,SKIN,RESPIRATORY
OR G.I. TARACTS IRRITATION,CNS DEPRESSION,BURNING OR REDNESS OF
EYES. CHRONIC:DERRMATITIS OR CRACKING OF SKIN,CNS EFFECTS.
Effects of Overexposure:SKIN/EYES:MAY CAUSE IRRITATION. OVER EXPOSURE
MAY CAUSE BURNING,REDNESS TO EYES, DRYING, CRACKING OR DERMATITIS
TO SKIN; INHALATION: IRRITATION TO RESPIRATORY TRACT. MAY CAUSE
CENTRAL NERVOUS SYSTEM D EPRESSION.
Medical Cond Aggravated by Exposure:SKIN DISORDERS

First Aid:INGESTION: DO NOT INDUCE VOMITING, GET MEDICAL ATTENTION.
SKIN: FLUSH WITH SOAP AND WATER. EYE: FLUSH WITH PLENTY OF WATER
FOR AT LEAST 15 MINUTES. GET MEDICAL ATTENTION. INHALATION: REMOVE
TO FRESH A IR.

Flash Point:160F,71C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL FIRE
FIGHTER'S PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:MAY FORM CARBON DIOXIDE AND/OR CARBON
MONOXIDE.

Spill Release Procedures:USE PROPER PERSONAL PROTECTION,CONTAIN FREE
LIQUID;USE SUITABLE INERT ABSORBENT MATERIAL AND RECOVER FOR PROPER
DISPOSAL.

Handling and Storage Precautions:AVOID CONTACT WITH SKIN & EYES. AVOID
EXTREME TEMPERATURES. AVOID OPEN FLAMES.
Other Precautions:NONE RECOMMENDED BY MANUFACTURER.

Respiratory Protection:NORMALLY NOT REQUIRED.
Ventilation:USE WITH ADEQUATE VENTILATION
Protective Gloves:CHEMICALLY IMPERVIOUS RUBBER GLOVES
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:NONE
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING OR SMOKING.
Supplemental Safety and Health
IN ACCORDANCE WITH THE QPL-85570-15 "B&B CONTACT E" IS FOR TYPE IV
MATERIAL OF MIL-C-85570B.IN ACCORDANCE WITH SPEC TYPE IV MATERIAL
ONLY SHALL CONTAIN 10.0 TO 15.0 % OF PARTICULATE RUBBER.DO NOT CONF
USE 'CONTACT X' WITH 'CONTACT E'.CONTACT E IS FOR TACTICAL PAINT
SCHEME SURFACES. CONTACT X IS FOR HIGH GLOSS SUFACES.

HCC:V4
Boiling Pt:B.P. Text:150F,65.5C
Spec Gravity:1.1
Viscosity:10 TO 18 CPS
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:APPRECIABLE
Appearance and Odor:CREAMY VISCOUS LIQUID, SOLVENT ODOR

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, STRONG ACIDS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE
CARBON DIOXIDE AND/OR CARBON MONOXIDE.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL,STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.